Alpine PSS-24WRA Complete Sound System Upgrade | '18-'23 JL Wrangler/ '20+ JT Gladiator
Free US Standard Shipping, 60-Day Returns, 1-Year Limited Warranty
COMPATIBLE WITH FACTORY AMPLIFIED JEEPS!
PLUG AND PLAY, NO CUTTING OPTION!
Check out our 100% plug and play no cutting option pods. We've preloaded the plug and play speaker pods with a set of S-Series 6.5" coaxial speakers and a set of 1" SPV-10TW-WRA tweeters to provide you with a simple to install soundbar speaker upgrade. Select to substitute for the plug and play pods at checkout and we'll take of the rest. Your pods will come pre-loaded and ready to install with absolutely no cutting at all!
TOP-OFF-SOUND
Your Jeep® begs for top-off drives, whether cruising down the highway or weaving through trails, so you need a sound system that delivers music for all your adventures. The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified, or AMPLIFIED 2018 – 2023 Jeep® Wrangler and non-amplified, or AMPLIFIED 2020 – Up Jeep® Gladiator.
- Installation Note: On 2-door Wranglers, the PSS-24WRA will fit 2019 and newer Jeeps ONLY. It is not compatible with two-door Wranglers that have scissor style seat brackets, so it will not fit the 2018 2-door Wrangler JL.
- Estimated Installation Time: 8 Hours
- Installation Guide
- FEATURES
- TECH SPECS
- WHAT'S IN THE BOX
-
- Complete, five-channel powered sound system upgrade package
- Compatible with four-door, non-amplified 2018 - Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator
- Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep® Wrangle
- Includes Alpine’s SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U
- 180W, 4-channel Power Pack amplifier
- 120W, 8” powered subwoofer
- (2x) 6.5” weather-resistant mid-bass drivers
- (2x) 1” weather-resistant teteron dome
- tweeters with vehicle-specific connectors and crossovers
- Vehicle specific front speaker pods with vehicle-specific connectors
- Tweeter adapter plates allow for use of the original factory tweeter locations
- SPV-65-JLT weather-resistant rear soundbar speaker system
- Rugged, premium grills designed to emulate the factory look and appeal
- Vehicle-specific connectors for plug-and-play speaker installation
- Utilizes factory bolt locations
- Durable stamped, steel frame speaker basket design
Includes template for mounting - Vehicle specific T-harness for installation with OEM radio into compatible 2018 – 2023 Jeep® Wrangler and 2020 – Up Jeep® Gladiator vehicles
- Vehicle specific mounting brackets allow for the powered sub and amp to be secured under the passenger seat without drilling
- (2x) 6.5" S-Series coaxial 2-way speaker (if plug and play pods selected)
- (2x) 1" weather-resistant teteron dome (if plug and play pods selected)
COMPLETE PACKAGE
Go beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has 5-channels of powered sound that replaces your factory system. The package includes two sets of 6.5” weather-resistant mid-bas drivers and 1” weather-resist tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer and a 4-channel power pack amplifier.Ask A Question
-
Front (SPV-65X-WRA):
-
Power handling: 75 watts RMS (225 watts peak)
-
Frequency response: 65kHz – 22kHz
-
Nominal impedance: 4 ohms
-
Weather-resistant: IP55
Rear (SPV-65-JLT):
-
Power handling: 90 watts RMS (270 watts peak)
-
Frequency response: 50kHz – 22kHz
-
Nominal impedance: 4 ohms
-
Weather-resistant: IP55
Powered Subwoofer (PWE-S8):
-
120 watts RMS (240 watts peak)
-
Frequency response: 32 - 150Hz
-
Variable low-pass crossover (80-200 Hz)
-
Variable phase control (0-180 degrees)
- preamp- and speaker-level inputs
Four Channel Power Pack Amplifier (KTP-445U):
-
45 watts RMS x 4 at 4 or 2 ohms
-
90 watts RMS x 2 bridged at 4 ohms
-
Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave)
-
Switchable RCA or speaker-level inputs )
Dimensions:
-
27” L x 18.5” W x 19.5” H
-
40lbs
Ask A Question
-
-
- PWE-S8 - 8” Compact Powered Subwoofer
- SPV-65-JLT - Rear Soundbar Speakers
- KTP-445U - 4-Channel Power Amplifier
- SPV-65X-WRA - Front Component Speakers
- ALP-POD-JLT - Front Speaker Pods
- PSU-BKT-JL - Brackets (Left & Right)
- ALP-HRN-PSU300 - Power Harness
- ALP-THRN-CH2 - Chrysler T-Harness
- CT6 6” Cable Ties
- PHPSM412 Pan Head Phillips Screws (M4 x 12)
- SLWM4 M4 Split Lock Washers
- PHSCR832 8-32 Pan Head Phillips Screws
- Speaker pods with S-Series S2-S65 Coaxial speaker and 1" tweeter
- Installation Manual
Ask A Question